PREPARING BRICKS FOR EXTERIOR MASONRY PAINT

If you are planning for house exterior design and looking for a quick, simple, and inexpensive solution to update the appearance of your brick house. Colored bricks are still one of the biggest exterior trends in homes right now, and they’re popular because of their affordability and ability to change a location radically.

The coating on bricks may completely alter the appearance of your property and modernize its outdated look. Because of their rough surface, which gives them a structured and natural appearance, even old bricks can be easily rejuvenated with paint. It’s also a great technique to conceal minor blemishes and splits on bricks.

What to Consider Before Preparing a Bricks Wall for Painting?

1. Clean the bricks

A perfectly prepared wall will not only make painting smoother but will also contribute to the creation of a brilliant, long-lasting texture as well as improve house exterior design. Before painting, thoroughly clean the brick wall with a gentle detergent solution of household and water to eliminate any leftover grime. Rinse the wall once and make sure it’s scorched before continuing.

2. Fix holes

The brick exterior requires little prepping; you should remove loose sand and cement with a scrubbing brush, fix the holes, and repair cracks before painting. After scratching the wall, the wall is entirely ready for coating.

3. Apply primer

To assure that the finishing coat adheres, a thin preliminary coat of suitable masonry paint should be applied to new or exposed surfaces. After preparation, primers can be used on powdery or chalky surfaces. On new or exposed surfaces, avoid applying stabilizing primers. When changing the color of a brick wall radically, a second coat of primer is necessary to successfully block off dark brick color when painting with a lighter paint color. Use a roller or a paint spray to cover many bricks. Wear protective gear such as safety glasses, gloves, and a mask. Brushes are ideal for small portions. Complete a minimum of 24 hours for drying after applying first and second coatings.

4. Weather situation

During the process of house exterior design, Always consider the weather conditions before painting. It’s not a good idea to paint bricks when it’s too cold or too hot. Wind and rain aren’t likely to help.

Masonry is susceptible to water absorption due to uncovered storage and rain. Most paints will lose adhesion if they are exposed to too much moisture. Blisters, peeling, mold, and algae growth can all be caused by humidity. Furthermore, the high moisture level, combined with the alkalis and salts in the masonry, can result in efflorescence, alkaline reactions, and filth.

5. Water damage protection

Before painting on bricks, search for evidence of flood damage such as wet areas, mold, and peeling paint, and treat the source of the problem before allowing the walls to dry completely. Water can be trapped in the wall system if the paint is applied to moist brickwork. It can result in peeling paint, thin cracks, and more water penetration. Water can freely flow through the walls, causing significant damage.

Experienced painters use special solutions that evaporate the water in the walls into the atmosphere to avoid difficulties that may come from using products that alter the breathability of masonry. At the same time, it stops moisture and rainfall from plunging into.

6. Tools and items

Your workflow will be smooth and easy if you have the correct tools, just like any other job. Make sure you have a sprayer or roller capable of covering a broad area quickly. A sprayer is recommended. It cuts down on labor time, makes it easier to reach all joints, and makes things easier in general. However, spray from all sides to ensure that the paint reaches every corner of the wall. The essential tools are listed below.

  • Liquid detergent
  • Paintbrush
  • Paint roller
  • Painter tape
  • Bricks primer
  • Wire brush
  • Metal brush
  • Drop cloths
  • Electronic moisture meter

 

7. Alkalinity

Another major factor to check before painting masonry is alkalinity. Although bricks are generally neutral, the cement in which they are laid contains alkalis, which are mineral nutrient salts. Oil-based paint products are affected by free alkali, which eventually causes the entire coating to crumble. Saponification is the technical term for this phenomenon. To protect the alkali-resistant paint, it’s a good idea to use an alkali-resistant primer.

8. Choose a suitable color.

Bricks are popular among architects who want to create a vintage or rustic look. Brick exterior walls may make buildings and homes warmer and homier, and bare brick walls are typically desirable for homes, restaurants, and shops.

The color and shape of the brick can significantly impact house exterior design due to the ambiance it generates. Brown bricks look more natural and rustic, whereas white bricks look great in minimalist designs. Red, white, beige, brown, orange, grey, or black are popular brick hues, and they come in a variety of patterns and trims.

READ NEXT: 5 ECO-FRIENDLY LANDSCAPING IDEAS YOU SHOULD KNOW

RELATED TOPICS: house exterior design